Visualization
[read more="Read More" less="Read Less"]
Highlights:
- Ease of operation thanks to full-graphic and individually configurable user interface
- Convenient remote control via web-compatible end devices such as tablets or smart phones
- Straightforward and intuitive engineering via web editor without additional software
- Cost benefit thanks to built-in commissioning interface to KNX plants
- Reduced effort owing to remote maintenance and remote commissioning.
Touch screen
- Multifunctional display/operating device for the KNX, with 320 x 240 pixels, 5.7" TFT color display and touch screen
- Dimming of LED background lighting over the operator interface
- For the display and operation of at least 210 communication objects on at least 20 display pages
- An additional page for the display and acknowledgement of at least 16 alarms
- Time program as weekly program for at least 110 communication objects and at least 10 switching tasks per weekday
- Presence simulation for at least 50 communication objects
Color display with pushbutton
- Multifunctional display/operating device for KNX, with 320 x 240 pixel, 2.8" LCD color display
- For the display and operation of at least 18 configurable room operator functions
- Switching On/Off/Over and Pushbutton function (bell function)
- Shutter/blind/roller control
- Positively driven operation
- Scene control: Store and call up scene 8 bit, store and call up scene 1 bit
- Text display and warning and alarm indications
- Operation using touch screen and/or by turning/pushing rotary/push button
- RGB LED as orientation light or for signaling alarm indications
- Buzzer for acoustic alarm indication or as feedback when operating touch screen
- Integrated room temperature sensors
Room thermostat
- For heating and/or cooling applications
- KNX communications
- Operating modes: Comfort, Economy and Protection
[read more="Read More" less="Read Less"]
- 2 or 3-position control outputs
- Output for 1-speed or 3-speed fan
- Automatic or manual heating/cooling changeover
- Adjustable commissioning and control parameters
- Minimum and maximum setpoint limitation
- Backlit display
Touch pushbutton
- Sensitive pair of touch areas for vertical operation
- Per touch area selectable function, scene controller
[read more="Read More" less="Read Less"]
- Round, transparent circle per touch area to the RGB LED background lighting
- Glass cover with chrome border
- Proximity sensor
Pushbutton
- Vertical operation
- Per pushbutton selectable function, scene controller
- LED for orientation light
[read more="Read More" less="Read Less"]
- Labeling field
- Temperature sensor
Motion sensor
- Passive infrared detector for ceiling mounting indoors
- Optional blinding of parts of the detection area
[read more="Read More" less="Read Less"]
- Mixed light measurement
- Cyclical sending or sending on change of value of the measured brightness value (Lux)
- Integrated two-position controller
- Constant light level control
- Lighting control configurable as fully automatic or semi-automatic
- Motion detection for three function blocks (presence detector, motion detector, and HVAC detector)
lighting actuator
- (2/4/6/8/12/16) channel switching and dimming actuators
- switching outputs (relay contacts) for 230 V AC, 50/60 Hz, 16 A
[read more="Read More" less="Read Less"]
- Slide switch per relay output for manual operation and switch position indication
- Selection between identical or individual configuration of all channels
- Command objects for each actuator channel for switching on/off, dimming brighter/darker and set/value
- Per channel configurable time-limited activation of the lighting during night mode (base lighting)
- Warning 30 seconds prior to imminent switch off by dimming to 50 % of the previous dimming value for each channel with time-limited operation
- Switching on or off of a channel by dimming brighter/darker
Shutter actuator
- 4 channels (one up and one down each)
- Rated contact voltage AC 230 V, 50 Hz
- Integrated power supply unit for the electronics, connected to AC 230 V
[read more="Read More" less="Read Less"]
- Separate raising/lowering protection
- Integrated 1-bit scene control, 2 Scenes to be integrated per channel
HVAC actuator
- Universal controllers with integrated control and supervisory functions
- Tested, predefined applications (refer to Application Catalog)
- Flexible configuration
[read more="Read More" less="Read Less"]
- Suited for the controlled variables temperature, relative / absolute humidity, pressure / differential, air flow rate, indoor air quality, etc.
- Autonomous sequence controllers with P, PI or PID mode
- Functions can be extended (extension modules)
- Clear-text operation with separate operator unit
Line coupler
- For data exchange between two KNX bus lines with telegrams of up to 64 byte
- For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone line or as repeater for connecting two segments of the same line, with electrical isolation of the two bus lines
- Loadable filter table for control of the data exchange between the two bus lines
- Additional loadable filter table for telegrams with LTE addressing
- Detection of a communication fault on the lower-level line and signaling to the higher-level line